Aktuelles
Anfahrt
Förderanlagen-Fördertechnik
Handlingsysteme
Hebetechnik
Home
Jobanfrage
Kontakt
Partner und Freunde
Handlingsysteme
Referenzen
Referenzen Förderanlagen
Referenzen Handlingsysteme
Referenzen Hebetechnik
Referenzen Sondermaschinen
Referenzen steuerungstechnik
Sondermaschinen
Steuerungstechnik
Unternehmen

     

   ::home::

   ::Deutsch::


Automatic Ultrasonic Inspection of Aluminum Slabs
SAG Salzburger Aluminium AG, Werk Schwarzach, Salzburg

austrotherm
Aluminum slabs or plates that have been machined (with dimensions up to 4,100x2,000x300mm) are deposited with the stacker truck onto the forklift. The system control automatically assimilates the water level so the ultrasonic sensors can check the correct distance to the block. After the automatic immersion of the blocks, the scan process begins, whereupon the size and position of the block is automatically detected before the actual testing starts. With the ultrasonic technology, the cavities that are found to be at least 1.2mm large (KSR 1.2) are saved to the system control. After completion of the test process, the cavity information is transmitted to the master computer, which calculates and relays the cutting information for the band saw facility.

Turning machine for surface treatment of drill rods.
Schoeller Bleckmann Oilfield Technology, Ternitz, NÖ

Drehmaschine für Oberflächenbehandlung von Bohrstangen
Turning machine with machine bed, 20 m long, twin drive with lathe chuck for tensioning and rotating of 2 parallel fitted hollow bars (outside max. 300 mm, length max. 10 m, weight max. 4.000 kg). Provided with double stationary supports, tension sliding carriage with servo drive, sound protection hood.

Tin sealing machine „TAC“, Ex-Zone 1
for bucket and top for the company Reichsfeld GmbH, Korneuburg, NÖ

Dosenverschließmaschine TAC
The tin buckets and tops of the producer Reichsfeld GmbG, which are globally predominantly used in chemical, lacquer and food industry are sealed by this machine fully automatic. The machine can be deposited right behind the tin filling station. In the tin station the tins are fitted from the tin magazine. In the sealing station the fitted tin is opened with the tension lever at first, then impressed on the hob bock and after this it gets sealed and secured by a splint pin. The machine is licensed for the operation in the areas of zone 1 exposed to explosion hazards. The sealing efficiency is about 400 buckets per hour.

Coating plant with loading robot
for EPS-profiles Austrotherm GesmbH, Werk Pinkafeld, Bgld.

austrotherm
Using the fully automatic coating plant EPS-profiles, which are used for design of frontages and interior accessories, get coated with a special plaster. A two-axle robotic palletizer adjusts the profiles in a programmable blacking pattern in drying carriages. The fully loaded carriages are then transported to the drying tunnel, which is tempered and able to mount up to 20 carriages.
Profile cross section 5 x 10 mm … 1.000 x 1.000 mm,
coating velocity 0,5 … 10 m/min

Rail carriages for drill rod transport
Schoeller Bleckmann Oilfield Technology, Ternitz, NÖ

Schienenwagen für Bohrstangentransport
Turning machine with machine bed, 20 m long, twin drive with lathe chuck for the tension and rotation of 2 parallel fitted hollow bars (outside max. 300 mm, length max. 10 m, weight max. 4.000 kg). Provided with double stationary supports, tension sliding carriage with servo drive, sound protection hood